A52s: Kernel- oder Gerätefehler? CPU-Kerne auf voller Frequenz

[g.]

Hallo liebe Community,
auf meinem neuen A52s ist mir aufgefallen, dass die CPUs 1-4 (so gut wie) immer auf max.Frequenz laufen. Wenn das Gerät im Standby ist, geht es aber in den Deep Sleep, Akkulaufzeit selbst sieht also releativ ok aus (hält einen Tag gut durch). Direkt nach dem Boot pendeln es noch etwas niedriger, dann aber sehr schnell immer nur auf max (s.Screenshot). Die Logs zeigen diverse Fehler (s.u. gefiltert/Auszug, über Samsung Log-Telefonnr. ermittelt). Liegt ein Fehler im Kernel oder Gerät vor ? Wie kann ich das ggf. beeinflussen ? Energiesparmodus, Verbindungen ein/aus etc. bringt alles nichts. Wäre nett, wenn jemand das mal kontrollieren könnte, nicht dass ich ein Sonntagsgerät erwischt habe. Als Apps kommen z.B. "Device Info HW" oder "CPU-Z" in Frage. Kann Samsung sich das bitte mal anschauen bzw. wohin müsste ich schreiben ?
Danke an euch und schöne Grüße !

01-01 07:00:27.145 I/ThermalEngine( 1354): Number of gpus :1 01-01 07:00:27.145 I/ThermalEngine( 1354): Number of cpus :8 01-01 07:00:27.146 I/ThermalEngine( 1354): update_cpu_topology: Cluster info node not found/sys/module/msm_thermal/cluster_info 01-01 07:00:27.148 E/ThermalEngine( 1354): tmd_add_cpufreq_dev_data: Invalid or no boost freqs 01-01 07:00:27.150 E/ThermalEngine( 1354): tmd_add_cpufreq_dev_data: Invalid or no boost freqs 01-01 07:00:27.151 E/ThermalEngine( 1354): tmd_add_cpufreq_dev_data: Invalid or no boost freqs 01-01 07:00:27.152 E/ThermalEngine( 1354): open/sys/class/thermal/cooling_device4/cur_state failed13 01-01 07:00:27.152 E/audit ( 768): type=1400 audit(1609459227.147:153): avc: denied { dac_override } for pid=1354 comm="thermal-engine" capability=1 scontext=u:r:vendor_thermal-engine:s0 tcontext=u:r:vendor_thermal-engine:s0 tclass=capability permissive=0 SEPF_SM-A528B_11_0010 audit_filtered  Line 38157: 08-04 20:39:59.556 E/[email protected]( 662): Error opening event_count for wakeup10: Original kwl [Path]=../../devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-00/c440000.qcom,spmi:qcom,pmk8350@0:rtc@6100/wakeup/wakeup10: Permission denied Line 38163: 08-04 20:39:59.559 E/[email protected]( 662): Error opening event_count for wakeup39: Original kwl [Path]=../../devices/platform/soc/98c000.i2c/i2c-21/21-0057/power_supply/pca9468-charger/wakeup39: Permission denied Line 38193: 08-04 20:39:59.589 E/[email protected]( 662): Error opening event_count for wakeup1: Original kwl [Path]=../../devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-00/c440000.qcom,spmi:qcom,pmk8350@0:pon_hlos@1300/wakeup/wakeup1: Permission denied Line 38194: 08-04 20:39:59.598 E/[email protected]( 662): Error opening event_count for wakeup8: Original kwl [Path]=../../devices/virtual/fastrpc/adsprpc-smd/wakeup8: Permission denied Line 38195: 08-04 20:39:59.598 E/[email protected]( 662): Error opening event_count for wakeup13: Original kwl [Path]=../../devices/platform/soc/0.etspi,et7xx/wakeup/wakeup13: Permission denied Line 38196: 08-04 20:39:59.603 E/[email protected]( 662): Error opening event_count for wakeup11: Original kwl [Path]=../../devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-00/c440000.qcom,spmi:qcom,pmk8350@0:rtc@6100/rtc/rtc0/wakeup11: Permission denied Line 38708: 08-04 20:39:59.744 E/libmdmdetect( 891): Failed to open /sys/bus/msm_subsys/devices/subsys2/name: Permission denied Line 38709: 08-04 20:39:59.745 E/libmdmdetect( 891): Failed to open /sys/bus/msm_subsys/devices/subsys5/name: Permission denied Line 38710: 08-04 20:39:59.745 E/libmdmdetect( 891): Failed to open /sys/bus/msm_subsys/devices/subsys3/name: Permission denied  <6>[ 3494.748565] [3: HyPerThread: 1001] cflm_freq_decision: input: type(0), min(2035200), max(0) <6>[ 3494.748576] [3: HyPerThread: 1001] cflm_freq_decision: new_min=2035200, ltl_max=902400, over_limit=0 <6>[ 3494.748613] [3: HyPerThread: 1001] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(2035200 ~ 2400000), p(2035200 ~ 2400000) <6>[ 3494.921728] [2: HyPerThread: 1001] cflm_freq_decision: input: type(0), min(2035200), max(0) <6>[ 3494.921740] [2: HyPerThread: 1001] cflm_freq_decision: new_min=2035200, ltl_max=902400, over_limit=0 <6>[ 3494.921751] [2: HyPerThread: 1001] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(2035200 ~ 2400000), p(2035200 ~ 2400000) <6>[ 3494.924319] [3: HyPerThread: 1001] cflm_freq_decision: input: type(0), min(1324800), max(0) <6>[ 3494.924329] [3: HyPerThread: 1001] cflm_freq_decision: new_min=1324800, ltl_max=902400, over_limit=0 <6>[ 3494.924399] [3: HyPerThread: 1001] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(1324800 ~ 2400000), p(1324800 ~ 2400000)  <6>[ 44.565999] [6: POSIX timer 22: 8062] cflm_freq_decision: input: type(0), min(2400000), max(0) <6>[ 44.566003] [6: POSIX timer 22: 8062] cflm_freq_decision: new_min=2400000, ltl_max=902400, over_limit=0 <6>[ 44.566007] [6: POSIX timer 22: 8062] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(2400000 ~ 2400000), p(2400000 ~ 2400000) <3>[ 45.147365]I[3: swapper/3: 0] netio u 0 0 376 156 w0 30103 55 0 25188 59 0 tun0 488 4 0 268 4 0 <6>[ 45.303876] [3: POSIX timer 21: 8005] cflm_freq_decision: input: type(0), min(-1), max(0) <6>[ 45.303973] [3: POSIX timer 21: 8005] cflm_update_current_freq: current freq: s(691200 ~ 1804800), g(691200 ~ 2400000), p(806400 ~ 2400000)   Line 2304: <3>[11141.074126] [5:crtc_commit:105: 352] [SDE_0] ss_panel_data_read_gpara : error: invalid set(355): samsung,ldi_debug0_rx_cmds_revA Line 2305: <3>[11141.074134] [5:crtc_commit:105: 352] [SDE_0] ss_read_rddpm : error: fail to read rddpm(ret=-22) Line 2306: <3>[11141.074137] [5:crtc_commit:105: 352] [SDE_0] ss_panel_data_read_gpara : error: invalid set(358): samsung,ldi_debug3_rx_cmds_revA Line 2307: <3>[11141.074140] [5:crtc_commit:105: 352] [SDE_0] ss_read_rddsm : error: fail to read rddsm(ret=-22) Line 2308: <3>[11141.074143] [5:crtc_commit:105: 352] [SDE_0] ss_panel_data_read_gpara : error: invalid set(357): samsung,ldi_debug2_rx_cmds_revA Line 2309: <3>[11141.074145] [5:crtc_commit:105: 352] [SDE_0] ss_read_errfg : error: fail to read errfg(ret=-22) Line 2310: <3>[11141.074148] [5:crtc_commit:105: 352] [SDE_0] ss_panel_data_read_gpara : error: invalid set(359): samsung,ldi_debug4_rx_cmds_revA Line 2311: <3>[11141.074151] [5:crtc_commit:105: 352] [SDE_0] ss_read_dsierr : error: fail to read dsierr(ret=-22) Line 2312: <3>[11141.074153] [5:crtc_commit:105: 352] [SDE_0] ss_panel_data_read_gpara : error: invalid set(361): samsung,ldi_debug6_rx_cmds_revA Line 2313: <3>[11141.074156] [5:crtc_commit:105: 352] [SDE_0] ss_read_mipi_protocol_err : error: fail to read protocol_err(ret=-22) Line 2319: <3>[11141.074594] [1:crtc_commit:105: 352] [SDE_0] ss_set_panel_state : error: set panel state 0 Line 2323: <3>[11141.080124]I[0: Binder:8814_6:13082] [drm:sde_encoder_phys_cmd_te_rd_ptr_irq:273] [sde error]error: invalid drm_conn Line 2323: <3>[11141.080124]I[0: Binder:8814_6:13082] [drm:sde_encoder_phys_cmd_te_rd_ptr_irq:273] [sde error]error: invalid drm_conn Line 2929: <3>[11147.319773] [3: Binder:659_1: 3936] PM: Device 17a10040.qcom,wcn6750 failed to suspend: error -11 Line 3766: <3>[11149.523512] [3:crtc_commit:105: 352] [SDE_0] ss_set_panel_state : error: set panel state 1 Line 3788: <3>[11149.541707] [5: Binder:1123_A: 2350] [SDE_0] ss_adaptive_control_store : error: Panel is not ready. Panel State(1) Line 3790: <3>[11149.541896] [5: Binder:1123_A: 2350] [SDE_0] ss_adaptive_control_store : error: Panel is not ready. Panel State(1) Line 3858: <3>[11149.669337] [3:crtc_commit:105: 352] [SDE_0] ss_set_panel_state : error: set panel state 2 Line 5936: <11>[11376.917719] [5: init: 1] CASS: errorNotifyCB error(4) Line 5936: <11>[11376.917719] [5: init: 1] CASS: errorNotifyCB error(4) Line 6108: <3>[11377.020113] [4:crtc_commit:105: 352] [SDE_0] ss_panel_data_read_gpara : error: invalid set(355): samsung,ldi_debug0_rx_cmds_revA Line 6109: <3>[11377.020119] [4:crtc_commit:105: 352] [SDE_0] ss_read_rddpm : error: fail to read rddpm(ret=-22) Line 6110: <3>[11377.020122] [4:crtc_commit:105: 352] [SDE_0] ss_panel_data_read_gpara : error: invalid set(358): samsung,ldi_debug3_rx_cmds_revA Line 6111: <3>[11377.020124] [4:crtc_commit:105: 352] [SDE_0] ss_read_rddsm : error: fail to read rddsm(ret=-22) Line 6112: <3>[11377.020127] [4:crtc_commit:105: 352] [SDE_0] ss_panel_data_read_gpara : error: invalid set(357): samsung,ldi_debug2_rx_cmds_revA Line 6113: <3>[11377.020129] [4:crtc_commit:105: 352] [SDE_0] ss_read_errfg : error: fail to read errfg(ret=-22) Line 6114: <3>[11377.020132] [4:crtc_commit:105: 352] [SDE_0] ss_panel_data_read_gpara : error: invalid set(359): samsung,ldi_debug4_rx_cmds_revA Line 6115: <3>[11377.020135] [4:crtc_commit:105: 352] [SDE_0] ss_read_dsierr : error: fail to read dsierr(ret=-22) Line 6116: <3>[11377.020137] [4:crtc_commit:105: 352] [SDE_0] ss_panel_data_read_gpara : error: invalid set(361): samsung,ldi_debug6_rx_cmds_revA Line 6117: <3>[11377.020140] [4:crtc_commit:105: 352] [SDE_0] ss_read_mipi_protocol_err : error: fail to read protocol_err(ret=-22) Line 6126: <3>[11377.020631] [1:crtc_commit:105: 352] [SDE_0] ss_set_panel_state : error: set panel state 0 Line 7181: { 2046062 }[ XBL ] Failed to launch default charger app, status: Load Error Line 7879: <5>[ 0.000000] [0: swapper: 0] Kernel command line: log_buf_len=256K rcupdate.rcu_expedited=1 rcu_nocbs=0-7 kpti=off cgroup.memory=nokmem console=null androidboot.hardware=qcom androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 androidboot.usbcontroller=a600000.dwc3 swiotlb=0 loop.max_part=7 cgroup.memory=nokmem,nosocket firmware_class.path=/vendor/firmware_mnt/image pcie_ports=compat loop.max_part=7 iptable_raw.raw_before_defrag=1 ip6table_raw.raw_before_defrag=1 printk.devkmsg=on androidboot.verifiedbootstate=green androidboot.keymaster=1 androidboot.ulcnt=0 androidboot.vbmeta.device=PARTUUID=4b7a15d6-322c-42ac-8110-88b7da0c5d77 androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=locked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=17728 androidboot.vbmeta.digest=2c702c43ef3a8465c2a38db22695976580c657d4f6dbdbf67847142df01bc7d2 androidboot.vbmeta.invalidate_on_error... Line 8104: <3>[ 0.755645] [7: swapper/0: 1] Error creating thermal debugfs directory. err:-19 Line 8219: <4>[ 0.843199] [7: swapper/0: 1] qcom-spmi-gpio: probe of c440000.qcom,spmi:qcom,pmr735a@4:pinctrl@8800 failed with error -5 Line 8246: <4>[ 0.863219] [7: swapper/0: 1] Error: swapper/0: fastrpc_device_init: failed to create debugfs root dir Line 8334: <6>[ 0.897730] [4: swapper/0: 1] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: PARTUUID=4b7a15d6-322c-42ac-8110-88b7da0c5d77 Line 8460: <3>[ 0.936223] [4: swapper/0: 1] sec-thermistor samsung_mobile_device:sec_thermistor@2: Error applying setting, reverse things back Line 8464: <3>[ 0.936286] [4: swapper/0: 1] sec-thermistor samsung_mobile_device:sec_thermistor@1: Error applying setting, reverse things back Line 8554: <3>[ 0.963774] [3: kworker/u16:1: 67] [drm:dsi_display_dev_probe] *ERROR* [msm-dsi-error]: dsi_display_dev_probe ++ Line 8554: <3>[ 0.963774] [3: kworker/u16:1: 67] [drm:dsi_display_dev_probe] *ERROR* [msm-dsi-error]: dsi_display_dev_probe ++ Line 8558: <3>[ 0.964076] [3: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: component add : (null) ++ Line 8558: <3>[ 0.964076] [3: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: component add : (null) ++ Line 8560: <3>[ 0.964133] [3: kworker/u16:1: 67] [drm:dsi_ctrl_get] *ERROR* [msm-dsi-error]: inv: Device with of node not found rc=-517 Line 8560: <3>[ 0.964133] [3: kworker/u16:1: 67] [drm:dsi_ctrl_get] *ERROR* [msm-dsi-error]: inv: Device with of node not found rc=-517 Line 8561: <3>[ 0.964143] [3: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: failed to get dsi controller, rc=-517 Line 8561: <3>[ 0.964143] [3: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: failed to get dsi controller, rc=-517 Line 8562: <3>[ 0.964152] [3: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: [(null)] failed to initialize resources, rc=-517 Line 8562: <3>[ 0.964152] [3: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: [(null)] failed to initialize resources, rc=-517 Line 8563: <3>[ 0.964162] [3: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: device init failed, rc=-517 Line 8563: <3>[ 0.964162] [3: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: device init failed, rc=-517 Line 8604: <4>[ 1.011582] [6: kworker/u16:1: 67] qcom,adc-tm: probe of c440000.qcom,spmi:qcom,pmk8350@0:adc_tm@3400 failed with error -22 Line 8667: <3>[ 1.036949] [6: kworker/u16:1: 67] [drm:dsi_display_dev_probe] *ERROR* [msm-dsi-error]: dsi_display_dev_probe ++ Line 8667: <3>[ 1.036949] [6: kworker/u16:1: 67] [drm:dsi_display_dev_probe] *ERROR* [msm-dsi-error]: dsi_display_dev_probe ++ Line 8671: <3>[ 1.037113] [6: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: component add : (null) ++ Line 8671: <3>[ 1.037113] [6: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: component add : (null) ++ Line 8673: <3>[ 1.037137] [6: kworker/u16:1: 67] [drm:dsi_ctrl_get] *ERROR* [msm-dsi-error]: inv: Device with of node not found rc=-517 Line 8673: <3>[ 1.037137] [6: kworker/u16:1: 67] [drm:dsi_ctrl_get] *ERROR* [msm-dsi-error]: inv: Device with of node not found rc=-517 Line 8674: <3>[ 1.037141] [6: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: failed to get dsi controller, rc=-517 Line 8674: <3>[ 1.037141] [6: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: failed to get dsi controller, rc=-517 Line 8675: <3>[ 1.037145] [6: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: [(null)] failed to initialize resources, rc=-517 Line 8675: <3>[ 1.037145] [6: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: [(null)] failed to initialize resources, rc=-517 Line 8676: <3>[ 1.037149] [6: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: device init failed, rc=-517 Line 8676: <3>[ 1.037149] [6: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: device init failed, rc=-517 Line 8733: <3>[ 1.113455] [3: kworker/u16:1: 67] sm5714_fuelgauge_parse_dt error reading v_empty -22 Line 8734: <3>[ 1.113463] [3: kworker/u16:1: 67] sm5714_fuelgauge_parse_dt error reading v_empty_origin -22 Line 8735: <3>[ 1.113473] [3: kworker/u16:1: 67] sm5714_fuelgauge_parse_dt error reading vbat_ovp -22 Line 8737: <3>[ 1.113496] [3: kworker/u16:1: 67] sm5714_fuelgauge_parse_dt error reading jig_gpio = -2 Line 8738: <3>[ 1.113505] [3: kworker/u16:1: 67] sm5714_fuelgauge_parse_dt error reading fg_resistor -22 Line 9053: <3>[ 1.205997] [3: kworker/u16:1: 67] [drm:dsi_display_dev_probe] *ERROR* [msm-dsi-error]: dsi_display_dev_probe ++ Line 9053: <3>[ 1.205997] [3: kworker/u16:1: 67] [drm:dsi_display_dev_probe] *ERROR* [msm-dsi-error]: dsi_display_dev_probe ++ Line 9057: <3>[ 1.206226] [3: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: component add : (null) ++ Line 9057: <3>[ 1.206226] [3: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: component add : (null) ++ Line 9059: <3>[ 1.206483] [3: kworker/u16:1: 67] [drm:dsi_panel_get] *ERROR* [msm-dsi-error]: ESD_MODE_PANEL_IRQ Line 9059: <3>[ 1.206483] [3: kworker/u16:1: 67] [drm:dsi_panel_get] *ERROR* [msm-dsi-error]: ESD_MODE_PANEL_IRQ Line 9060: <3>[ 1.206662] [3: kworker/u16:1: 67] [drm:dsi_pwr_enable_vregs] *ERROR* [msm-dsi-error]: No panel private Line 9060: <3>[ 1.206662] [3: kworker/u16:1: 67] [drm:dsi_pwr_enable_vregs] *ERROR* [msm-dsi-error]: No panel private Line 9077: <3>[ 1.207736] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt : error: LP11 init disabled Line 9078: <3>[ 1.207755] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt : error: ESC CLK 128M disabled Line 9079: <3>[ 1.207763] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt : error: alpm enable enabled Line 9080: <3>[ 1.207772] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt : error: Skip read on pre enabled Line 9083: <3>[ 1.207816] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt : error: TCON RDY GPIO(-2) is not valid!! Line 9091: <3>[ 1.207917] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt : error: 4625, backlight_tft_gpio gpio1 not specified Line 9092: <3>[ 1.207932] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt : error: 4625, backlight_tft_gpio gpio2 not specified Line 9093: <3>[ 1.207947] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt : error: 4625, backlight_tft_gpio gpio3 not specified Line 9094: <3>[ 1.207963] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt : error: 4625, backlight_tft_gpio gpio4 not specified Line 9099: <3>[ 1.208136] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt_gm2_flash_table : error: fail to find gm2_flash_table root node Line 9104: <3>[ 1.208187] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt : error: support_optical_fingerprint enabled Line 9112: <3>[ 1.208288] [3: kworker/u16:1: 67] [SDE_0] ss_parse_candella_mapping_table : error: Success to read table samsung,candela_map_table_revA Line 9114: <3>[ 1.208314] [3: kworker/u16:1: 67] [SDE_0] ss_parse_candella_mapping_table : error: Success to read table samsung,aod_candela_map_table_revA Line 9117: <3>[ 1.208341] [3: kworker/u16:1: 67] [SDE_0] ss_parse_hbm_candella_mapping_table : error: Success to read table samsung,hbm_candela_map_table_revA Line 9119: <3>[ 1.208398] [3: kworker/u16:1: 67] [SDE_0] ss_parse_candella_mapping_table : error: Success to read table samsung,hmt_candela_map_table_revA Line 9121: <3>[ 1.208775] [3: kworker/u16:1: 67] [SDE_0] ss_parse_hbm_candella_mapping_table : error: Success to read table samsung,hbm_candela_map_table_revI Line 9193: <3>[ 1.230480] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt_br_table : error: error reading samsung,flash_gamma_type rc=-22 Line 9193: <3>[ 1.230480] [3: kworker/u16:1: 67] [SDE_0] ss_panel_parse_dt_br_table : error: error reading samsung,flash_gamma_type rc=-22 Line 9210: <3>[ 1.230705] [3: kworker/u16:1: 67] [SDE_0] ss_self_disp_parse_dt : error: self mask crc_data[0] = d3 Line 9211: <3>[ 1.230713] [3: kworker/u16:1: 67] [SDE_0] ss_self_disp_parse_dt : error: self mask crc_data[1] = 9b Line 9220: <3>[ 1.230874] [3: kworker/u16:1: 67] [SDE_0] make_self_dispaly_img_cmds_FC3 : error: pcmds->cmds is null!! Line 9226: <3>[ 1.230963] [3: kworker/u16:1: 67] [SDE_0] make_self_dispaly_img_cmds_FC3 : error: pcmds->cmds is null!! Line 9240: <3>[ 1.234064] [6: kworker/u16:1: 67] [drm:msm_smmu_new] *ERROR* unable to find domain 1 compat: qcom,smmu_sde_nrt_unsec Line 9241: <3>[ 1.234073] [6: kworker/u16:1: 67] [drm:msm_smmu_new] *ERROR* unable to find domain 3 compat: qcom,smmu_sde_nrt_sec Line 9247: <3>[ 1.235218] [6: kworker/u16:1: 67] [drm:_sde_kms_setup_displays:1969] [sde error]dp get_info 0 failed Line 9255: <3>[ 1.237184] [6: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: component add success: ss_dsi_panel_S6E3FC3_AMS646YD01_LO_FHD Line 9255: <3>[ 1.237184] [6: kworker/u16:1: 67] [drm:dsi_display_init] *ERROR* [msm-dsi-error]: component add success: ss_dsi_panel_S6E3FC3_AMS646YD01_LO_FHD Line 9256: <3>[ 1.237190] [6: kworker/u16:1: 67] [drm:dsi_display_dev_probe] *ERROR* [msm-dsi-error]: dsi_display_dev_probe -- Line 9256: <3>[ 1.237190] [6: kworker/u16:1: 67] [drm:dsi_display_dev_probe] *ERROR* [msm-dsi-error]: dsi_display_dev_probe -- Line 9267: <3>[ 1.238146] [4: swapper/0: 1] usb_notify: register_usblog_proc error Line 9351: <6>[ 1.261360] [6: swapper/0: 1] [muic-sm5714:sm5714_muic_irq_init] muic-chgtype_attach(282), muic-dectimeout(283), muic-afc_error(284), muic-afc_sta_chg(285) Line 9732: <3>[ 1.294805] [3: swapper/0: 1] of_sm5714_usbpd_dt error reading op_power 5000 Line 9733: <3>[ 1.294813] [3: swapper/0: 1] of_sm5714_usbpd_dt error reading max_current 0 Line 9815: <4>[ 1.305801] [3: kworker/3:1: 71] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 Line 9833: <11>[ 1.335115] [0: init: 1] init: [libfs_mgr]Error updating for slotselect Line 9837: <11>[ 1.336079] [0: init: 1] init: [libfs_mgr]Error updating for slotselect Line 9866: <6>[ 1.377161] [6: init: 1] EXT4-fs (sda25): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic Line 9868: <14>[ 1.377265] [6: init: 1] init: [libfs_mgr]__mount return 0(source=metadata,target=/metadata,type=ext4,flags=416,options=noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic): Success Line 9908: <6>[ 1.404594] [6: init: 1] EXT4-fs (dm-6): mounted filesystem without journal. Opts: errors=panic Line 9910: <14>[ 1.404639] [6: init: 1] init: [libfs_mgr]__mount return 0(source=dm-6,target=/product,type=ext4,flags=1,options=errors=panic): Success Line 9918: <6>[ 1.407317] [6: init: 1] EXT4-fs (dm-7): mounted filesystem without journal. Opts: errors=panic Line 9920: <14>[ 1.407358] [6: init: 1] init: [libfs_mgr]__mount return 0(source=dm-7,target=/odm,type=ext4,flags=1,options=errors=panic): Success Line 9942: <11>[ 1.541520] [1: init: 1] init: [libfs_mgr]Error updating for slotselect Line 10530: <4>[ 2.722221] [4: modprobe: 469] msm-dai-tdm: probe of soc:qcom,msm-dai-tdm-hsif0-tx failed with error -22 Line 10690: <4>[ 2.857346] [5: modprobe: 510] stm_ts 25-0049: Direct firmware load for tsp_stm/fts5cu56a_a52sxq.bin failed with error -2 Line 10751: <14>[ 3.636002] [4: init: 1] init: Command 'readahead /vendor/etc/sysconfig --fully' action=early-init (/system/etc/init/bootchecker.rc:7) took 0ms and failed: Error opening /vendor/etc/sysconfig: No such file or directory Line 10958: <11>[ 3.974207] [7: init: 1] init: [libfs_mgr]Error updating for slotselect Line 10960: <11>[ 3.974692] [7: init: 1] init: [libfs_mgr]Error updating for slotselect Line 10972: <6>[ 4.006680] [5: init: 1] EXT4-fs (sda29): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic Line 10974: <14>[ 4.006873] [5: init: 1] init: [libfs_mgr]__mount return 0(source=cache,target=/cache,type=ext4,flags=406,options=noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic): Success Line 10983: <6>[ 4.023437] [4: init: 1] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic Line 10985: <14>[ 4.023564] [4: init: 1] init: [libfs_mgr]__mount return 0(source=persist,target=/mnt/vendor/persist,type=ext4,flags=406,options=noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic): Success Line 11001: <6>[ 4.042853] [7: init: 1] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic Line 11003: <14>[ 4.042986] [7: init: 1] init: [libfs_mgr]__mount return 0(source=efs,target=/mnt/vendor/efs,type=ext4,flags=406,options=noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic): Success Line 11014: <6>[ 4.057575] [5: init: 1] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic Line 11016: <14>[ 4.057693] [5: init: 1] init: [libfs_mgr]__mount return 0(source=sec_efs,target=/efs,type=ext4,flags=406,options=noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic): Success Line 11027: <14>[ 4.061611] [5: init: 1] init: [libfs_mgr]__mount return -1(source=carrier(missing),target=/carrier,type=ext4,flags=406,options=noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic): No such file or directory Line 11038: <14>[ 4.074192] [5: init: 1] init: [libfs_mgr]__mount return -1(source=carrier(missing),target=/carrier,type=ext4,flags=406,options=noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic): No such file or directory Line 11042: <11>[ 4.074718] [6: init: 1] init: [libfs_mgr]Ignoring failure to mount an un-encryptable or wiped partition on /dev/block/bootdevice/by-name/carrier at /carrier options: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic: No such file or directory Line 11068: <11>[ 4.091854] [4: init: 1] init: [libfs_mgr]Ignoring failure to mount an un-encryptable or wiped partition on /dev/block/bootdevice/by-name/spu at /spu options: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic: Invalid argument Line 11097: <6>[ 4.109518] [6: init: 1] EXT4-fs (sda30): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic Line 11098: <14>[ 4.109635] [6: init: 1] init: mount succeed (source=omr,target=/omr,type=ext4,flags=406,options=noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic) Line 11173: <11>[ 4.178404] [5: init: 1] init: [libfs_mgr]Error updating for slotselect Line 11175: <11>[ 4.178961] [5: init: 1] init: [libfs_mgr]Error updating for slotselect Line 11292: <14>[ 4.422572] [6: Binder:619_2: 619] fsck.f2fs: Info: No error was reported Line 11351: <11>[ 4.534316] [6: init: 1] init: unencrypted_dir:/data/unencrypted / ret:0 / errorno:17 Line 11993: <6>[ 5.045984] [4: init: 400] subsys-pil-tz: subsys_powerup(): pil_boot is successful from cdsp and waiting for error ready Line 11994: <6>[ 5.056681] [5: irq/252-smp2p: 179] subsys-pil-tz: subsys_err_ready_intr_handler(): Subsystem error monitoring/handling services are up fromcdsp Line 12013: <6>[ 5.148982] [7: kworker/7:4: 508] subsys-pil-tz: subsys_powerup(): pil_boot is successful from adsp and waiting for error ready Line 12025: <6>[ 5.189620] [4: irq/251-smp2p: 178] subsys-pil-tz: subsys_err_ready_intr_handler(): Subsystem error monitoring/handling services are up fromadsp Line 12108: <6>[ 5.451172] [4: kworker/u16:3: 309] subsys-pil-tz: subsys_powerup(): pil_boot is successful from yupik_ipa_fws and waiting for error ready Line 12324: <11>[ 5.732779] [4: qseecomd: 611] VaultKeeper :: : vk_prepare_service: Critical error! Mismatch vault eKey Line 12556: <6>[ 5.962801] [5:vendor.qti.medi: 908] subsys-pil-tz: subsys_powerup(): pil_boot is successful from venus and waiting for error ready Line 12607: <4>[ 6.401110] [0: surfaceflinger: 970] kgsl-3d 3d00000.qcom,kgsl-3d0: loading /vendor/firmware_mnt/image/a660_sqe.fw failed with error -13 Line 12608: <4>[ 6.401146] [0: surfaceflinger: 970] kgsl-3d 3d00000.qcom,kgsl-3d0: Direct firmware load for a660_sqe.fw failed with error -2 Line 12612: <4>[ 6.419069] [6: surfaceflinger: 970] adreno-a6xx-gmu 3d6a000.qcom,gmu: loading /vendor/firmware_mnt/image/a660_gmu.bin failed with error -13 Line 12613: <4>[ 6.419079] [6: surfaceflinger: 970] adreno-a6xx-gmu 3d6a000.qcom,gmu: Direct firmware load for a660_gmu.bin failed with error -2

 

[N.]

Hallo L: @gvamp,
danke für deine Nachricht! Ich habe das einmal an den technischen Support weitergegeben, die Kollegen dort überprüfen das.

 

[g.]

Hallo NathanB,
das ist nett, danke. Manchmal klappts nach dem Booten mit dem erwarteten Verhalten, dann aber nur für ein paar Minuten und es sieht wieder so aus wie beschrieben. Das hier habe ich noch in den Logs gefunden.
So sollte es vermutlich aussehen:

<6>[ 642.067697] [0: HyPerThread: 916] cflm_freq_decision: input: type(0), min(1324800), max(0) <6>[ 642.067709] [0: HyPerThread: 916] cflm_freq_decision: new_min=1324800, ltl_max=902400, over_limit=0 <6>[ 642.067721] [0: HyPerThread: 916] cflm_update_current_freq: current freq: s(1152000 ~ 1804800), g(1324800 ~ 2400000), p(1324800 ~ 2400000) <6>[ 642.068696] [0: HyPerThread: 916] cflm_freq_decision: input: type(0), min(1324800), max(0) <6>[ 642.068707] [0: HyPerThread: 916] cflm_freq_decision: new_min=1324800, ltl_max=902400, over_limit=0 <6>[ 642.068719] [0: HyPerThread: 916] cflm_update_current_freq: current freq: s(1152000 ~ 1804800), g(1324800 ~ 2400000), p(1324800 ~ 2400000) <6>[ 642.201549] [1:POSIX timer 149:18726] cflm_freq_decision: input: type(0), min(-1), max(0) <6>[ 642.201583] [1:POSIX timer 149:18726] cflm_update_current_freq: current freq: s(691200 ~ 1804800), g(691200 ~ 2400000), p(806400 ~ 2400000)

So sieht es aber meistens aus (s.jeweils erste Frequenz):

<6>[ 193.126330] [3: HyPerThread: 937] cflm_freq_decision: input: type(0), min(1766400), max(0) <6>[ 193.126341] [3: HyPerThread: 937] cflm_freq_decision: new_min=1766400, ltl_max=902400, over_limit=0 <6>[ 193.126369] [3: HyPerThread: 937] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(1766400 ~ 2400000), p(1766400 ~ 2400000) <6>[ 193.177843] [3: HyPerThread: 937] cflm_freq_decision: input: type(0), min(1056000), max(0) <6>[ 193.177853] [3: HyPerThread: 937] cflm_freq_decision: new_min=1056000, ltl_max=902400, over_limit=0 <6>[ 193.177881] [3: HyPerThread: 937] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(1056000 ~ 2400000), p(1056000 ~ 2400000) <6>[ 193.347230] [3: POSIX timer 40:16684] cflm_freq_decision: input: type(0), min(-1), max(0) <6>[ 193.347314] [3: POSIX timer 40:16684] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(691200 ~ 2400000), p(806400 ~ 2400000) <3>[ 193.428571] [0:MdnieScenarioCo: 2245] [SDE_mdnie] Current APP : Current APP: UI_APP

Gruß und danke

 

[g.]

Hier noch der Unterschied zum Zeitpunkt, wenn ohne Lastveränderung die Frequenz auf Maximum geht.

 

[N.]

Hallo L: @gvamp,
unser Support-Team kümmert sich darum. *1f642.png* Wir melden uns bei weiteren Neuigkeiten.

 

[g.]

Edit: Bitte unbedingt einen Entwickler drauf schauen lassen, es ist offensichtlich ein Kernel-Fehler (s.u.)
Danke für die Zwischeninfo. In Samsung Members habe ich ebenfalls Kontakt. Die Vorschläge wie Selbsttest, Soft reset und Safe Mode haben aber bisher leider nichts gebracht. Hier ein Ausschnitt aus einem weiteren Log. Daraus habe ich die Vermutung, dass es mit diesen Zeilen zusammen hängt, offensichtlich immer dann wird nicht mehr auf eine niedrige Frequenz zurückgeschaltet:
<6>[ 9155.189741] [0: argosd: 3203] sec_argos:argos_pm_qos_notify() name:UFS, speed:0Mbps, prev level:0, request level:-1
<6>[ 9155.189761] [0: argosd: 3203] sec_argos:argos_freq_lock() update cpu freq 0
<6>[ 9155.189769] [0: argosd: 3203] set_freq_limit: cflm: id(3) freq(0)
<6>[ 9155.189777] [0: argosd: 3203] cflm_freq_decision: input: type(3), min(0), max(0)
<6>[ 9155.189793] [0: argosd: 3203] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(691200 ~ 2400000), p(806400 ~ 2400000)
Kurze Recherche im Netz ergab (z.B. beim S8), dass o.g. request level:-1 zumindest sehr ungewöhnlich ist/bisher nie gab.
-> Es handelt sich übrigens um die einzigen Aufrufe von UFS in allen Logs
-> type(3) = Bildschirmtouch mit min(0), max(0) und request level:-1 darf es scheinbar nicht geben, wird danach nie wieder resettet.
-> Nachvollziehbar in den Kernel Sourcen auf github z.B. hier: https://github.com/Velosh/android_kernel_samsung_sm7125/blob/d591cbac3c3eb77b597382860d364e9ca365250...
-> Bitte daher einen Entwickler drauf schauen lassen, ich würde mir eine Kernel-Korrektur erhoffen.
Wenn es einen Weg gebe, z.B. per Root, selbst den Governor/die Frequenz zu setzen, wäre das natürlich auch übergangsweise ok. *1f642.png*

<6>[ 9138.700959] [3:POSIX timer 316:20175] cflm_update_current_freq: current freq: s(691200 ~ 1804800), g(691200 ~ 2400000), p(806400 ~ 2400000) <6>[ 9138.753445] [1: iod: 658] !@ 8,0 r 546746 13050024 w 189901 3889824 d 161964 91158332 f 0 0 iot 417240 0 th 0 0 0 pt 0 inp 0 0 9138.839 <6>[ 9139.001613] [0: kworker/0:1:18405] [GRIP] sx9360_process_interrupt: status 8 <6>[ 9139.003126] [0: kworker/0:1:18405] [GRIP] sx9360_touch_process: 0x8 <6>[ 9139.007227] [0: kworker/0:1:18405] [GRIP] sx9360_get_data: retry : 1, CONVSTAT : 0 <6>[ 9139.017553] [0: kworker/0:1:18405] [GRIP] sx9360_get_data: capMain: 1132896, useful: -2757, avg: -3758, diff: 1001, Offset: 4716 <6>[ 9139.017563] [0: kworker/0:1:18405] [GRIP] sx9360_send_event: touched <6>[ 9139.556820] [1: SDHMS:z0.d: 5623] ssrm_camera_info : <6>[ 9139.851732] [3: kworker/3:2:19092] tsens[0:239][1:235][2:239][3:231][4:235][5:235][6:235][7:235][8:227][9:239][10:231][11:239][12:235][13:239][14:239][15:232][16:228][17:232][18:228][19:224][20:232][21:228][22:228][23:228][24:224][25:228][26:228] <6>[ 9140.759623] [0: SDHMS:E0.h: 5679] sm5714_fg_get_property: psp = 0x12 <6>[ 9140.926330] [0: kworker/0:1:18405] [GRIP] sx9360_process_interrupt: status 4 <6>[ 9140.927725] [0: kworker/0:1:18405] [GRIP] sx9360_touch_process: 0x0 <6>[ 9140.931903] [0: kworker/0:1:18405] [GRIP] sx9360_get_data: retry : 1, CONVSTAT : 0 <6>[ 9140.942562] [0: kworker/0:1:18405] [GRIP] sx9360_get_data: capMain: 1132641, useful: -3393, avg: -3757, diff: 364, Offset: 4716 <6>[ 9140.942574] [0: kworker/0:1:18405] [GRIP] sx9360_send_event: released <6>[ 9141.072517] [2: kworker/u16:8:13076] sm5714_fg_get_property: psp = 0xc <6>[ 9141.075819] [0: kworker/u16:8:13076] sm5714_fg_get_property: psp = 0xd <6>[ 9141.075835] [0: kworker/u16:8:13076] sm5714_fg_get_property: psp = 0xd <6>[ 9141.075846] [0: kworker/u16:8:13076] sm5714_fg_get_property: psp = 0x11 <6>[ 9141.078342] [3: kworker/u16:8:13076] sm5714_fg_get_property: psp = 0x12 <6>[ 9141.078375] [3: kworker/u16:8:13076] sm5714-charger sm5714-charger: sm5714_chg_get_property: psp=37 <6>[ 9141.078388] [3: kworker/u16:8:13076] sm5714_fg_get_property: psp = 0x1c <6>[ 9141.078398] [3: kworker/u16:8:13076] sm5714_fg_get_property: charge_counter = 1003500 <6>[ 9141.092922] [2: kworker/u16:8:13076] sm5714_fg_get_property: psp = 0x2e <6>[ 9141.099737] [0: kworker/u16:8:13076] sm5714_vbatocv_check: mode change to mix RS auto mode <6>[ 9141.101608] [0: kworker/u16:8:13076] sm5714_fg_check_reg_init_need: SM5714_REG_FG_SYSTEM_STATUS : 0x1010 , return FALSE NO init need <6>[ 9141.102407] [0: kworker/u16:8:13076] sm5714_get_soc: batt_soc = 220, soc = 220, ret = 0x1612 <6>[ 9141.102429] [0: kworker/u16:8:13076] sm5714_update_all_value: chg_h=0, chg_f=0, chg_s=0, is_chg=0, ta_exist=0, v=3733, v_avg=3733, i=-222, i_avg=-167, ocv=3743, fg_t=223, b_t=207, cycle=8, soc=220 <6>[ 9141.130895] [3: kworker/u16:8:13076] [sm5714_fg_all_srams_1] 00:1612,01:1df2,02:06e1,03:2bfe,04:2bb6,05:81c6,06:81d1,07:0f59,08:2bfd,09:8157,0a:815f,15:0009,16:1dea,17:1e0d,18:14e6,19:1a19,1a:8138,1b:8014,1c:8004,20:1eda,21:1eda,22:1eda,23:1eda,24:1eda,25:1eda,26:1ed9,27:1edb,28:1ed7,29:1ed9,2a:1ed9,2b:1ed7,2c:1ed8,2d:1ed9,2e:1ed9,2f:1ed8, <6>[ 9141.130914] [3: kworker/u16:8:13076] sm5714_fg_get_scaled_capacity: scaled capacity (22.2) <6>[ 9141.130943] [3: kworker/u16:8:13076] sec_bat_get_battery_info:Vnow(3733mV),Vavg(3733mV),Inow(-222mA),Iavg(-167mA),Isysavg(0mA),Imax(100mA),Ichg(100mA),SOC(22%),Tbat(207),Tusb(0),Tchg(217),Twpc(0),Tblkt(0),Tdchg(203) <6>[ 9141.130965] [3: kworker/u16:8:13076] sm5714_fg_get_property: psp = 0x2c <6>[ 9141.130987] [3: kworker/u16:8:13076] sec-battery samsung_mobile_device:battery: sec_bat_cisd_check: [CISD] FG I2C fail. skip cisd check <3>[ 9141.131010] [3: kworker/u16:8:13076] sec_bat_thermal_check: co_c3: 0, c3_c2: 50, c2_c1: 150, c1_no: 180, no_wa: 420, wa_ov: 500, tz(NORMAL) <6>[ 9141.131049] [3: kworker/u16:8:13076] sec_bat_set_current_event: current event before(0x40000000), after(0x40000000) <6>[ 9141.131064] [3: kworker/u16:8:13076] sec_bat_set_current_event: current event before(0x40000000), after(0x40000000) <6>[ 9141.131093] [3: kworker/u16:8:13076] sm5714-charger sm5714-charger: sm5714_chg_get_property: psp=1058 <6>[ 9141.132375] [3: kworker/u16:8:13076] sm5714-charger: regmap: 0x07[0xFC],0x08[0xBE],0x09[0x7B],0x0A[0xFF],0x0B[0xFF],0x0C[0xFE],0x0D[0x02],0x0E[0x00],0x0F[0x00],0x10[0x00],0x11[0x00], <6>[ 9141.132406] [3: kworker/u16:8:13076] sm5714-charger: regmap: 0x12[0x00],0x13[0x64],0x14[0x05],0x15[0x00],0x16[0xFF],0x17[0x01],0x18[0x07],0x19[0x1D],0x1A[0x67],0x1B[0x16],0x1C[0x0E], <6>[ 9141.132432] [3: kworker/u16:8:13076] sm5714-charger: regmap: 0x1D[0x18],0x1E[0x11],0x1F[0xFF],0x20[0xFF],0x21[0xFF],0x22[0x04],0x23[0x01],0x24[0xFF],0x25[0x40],0x26[0x00], <6>[ 9141.133311] [3: kworker/u16:8:13076] sm5714-charger: regmap: 0x40[0x00],0x41[0x1C],0x42[0x25],0x43[0xFF],0x44[0xFF],0x45[0xFF],0x46[0x98],0x47[0x00],0x48[0xFF], <6>[ 9141.133336] [3: kworker/u16:8:13076] sm5714-charger: regmap: 0x49[0x00],0x4A[0x00],0x4B[0x00],0x4C[0x00],0x4D[0x00],0x4E[0x57],0x4F[0x14],0x50[0x09], <6>[ 9141.133358] [3: kworker/u16:8:13076] sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(NONE, NONE, 0, 0), rp(0), HV(NONE) <6>[ 9141.133372] [3: kworker/u16:8:13076] sec_bat_monitor_work: lcd(1), slate(0), store(0), siop_level(100), sleep_mode(0), Cycle(8) <6>[ 9141.133419] [3: kworker/u16:8:13076] sec-battery samsung_mobile_device:battery: sec_bat_set_polling: Polling time 30/30 sec. <6>[ 9141.133514] [3: kworker/3:2:19092] sec_bat_get_property cable type = 1 sleep_mode = 0 <6>[ 9141.133541] [3: kworker/3:2:19092] sm5714_fg_get_property: psp = 0x11 <6>[ 9141.136110] [3: kworker/3:2:19092] sm5714_fg_get_property: psp = 0x12 <6>[ 9141.139614] [0:android.hardwar: 878] sm5714_fg_get_property: psp = 0x11 <6>[ 9141.143120] [1:android.hardwar: 878] sm5714_fg_get_property: psp = 0x12 <6>[ 9141.144591] [1:android.hardwar: 878] sec_pogo_get_property: POGO not supported <6>[ 9141.145441] [1:android.hardwar: 878] sm5714_fg_get_property: psp = 0x11 <6>[ 9141.148826] [0:android.hardwar: 878] sec_bat_get_property cable type = 1 sleep_mode = 0 <6>[ 9141.149199] [0:android.hardwar: 878] sec_bat_show_attrs : HV_CHARGER_STATUS(0), max_charger_power(0), pd_max charge power(0) <6>[ 9141.149398] [0:android.hardwar: 878] sm5714_fg_get_property: psp = 0x28 <14>[ 9141.150271] [0:android.hardwar: 878] healthd: efs_buf: 0 8 6 0 65535 0 0 8 64 0 0 0 0 0 0 0 327 209 550 218 0 0 327 0 327 209 550 218 0 0 327 0 0 1 0 0 0 0 0 100 0 0 1 0 65535 0 0 3 0 0 0 0 0 0 0 264 210 0 0 280 222 264 0 264 210 0 0 280 222 264 0 0 0 0 0 0 0 0 0 0 0 <12>[ 9141.152790] [0:android.hardwar: 878] healthd: battery l=22 v=3733 t=20.7 h=2 st=3 c=-222 fc=4500000 o=1 ca=-167 ct=0 hv=0 sec=65536 sce=1073741824 tx=0 chg= <6>[ 9141.643438] [5: kworker/5:2:12772] thermal_sys: thermal: cdev[panel0-backlight:486] <6>[ 9142.257023] [5: kworker/5:2:12772] [GRIP] sx9360_get_data: retry : 1, CONVSTAT : 0 <6>[ 9142.267213] [5: kworker/5:2:12772] [GRIP] sx9360_get_data: capMain: 1132664, useful: -3337, avg: -3741, diff: 404, Offset: 4716 <6>[ 9142.767246] [3: iod: 658] !@ 8,0 r 546767 13050216 w 189912 3890036 d 161964 91158332 f 0 0 iot 417288 0 th 0 0 0 pt 0 inp 0 0 9142.853 <6>[ 9143.045592] [2:SDHMS Handler T: 4898] [SDE_0] vrr_show : 120 1 <6>[ 9143.178783] [3: kworker/3:2:19092] stm_ts 25-0049: [sec_input] mode:0000 tc:0 noise:0/0 ext_n:0 wet:0 wc:0(f:0) lp:20 fn:0061/0061 ED:0 PK:0// v:0028 C01T0028.LCIA.L Cal_flag:1 fail_cnt:0 // id:0,0 tmp:20 // #2 1 <6>[ 9143.454137] [0:UsbHostNotifica: 2048] pdic_param: is_lpcharge_pdic_param lpcharge=0 <6>[ 9143.454159] [0:UsbHostNotifica: 2048] pdic_param: is_lpcharge_pdic_param lpcharge=0 <6>[ 9143.454169] [0:UsbHostNotifica: 2048] pdic_param: is_lpcharge_pdic_param lpcharge=0 <6>[ 9143.454180] [0:UsbHostNotifica: 2048] pdic_param: is_lpcharge_pdic_param lpcharge=0 <6>[ 9143.454222] [0:UsbHostNotifica: 2048] usb_notify: usb_hw_param_show - ret : 104 <6>[ 9143.456862] [0: kworker/0:1:18405] [GRIP] sx9360_process_interrupt: status 8 <6>[ 9143.458198] [0: kworker/0:1:18405] [GRIP] sx9360_touch_process: 0x8 <6>[ 9143.461385] [0: kworker/0:1:18405] [GRIP] sx9360_get_data: retry : 1, CONVSTAT : 0 <6>[ 9143.472254] [0: kworker/0:1:18405] [GRIP] sx9360_get_data: capMain: 1132768, useful: -3076, avg: -3717, diff: 641, Offset: 4716 <6>[ 9143.472267] [0: kworker/0:1:18405] [GRIP] sx9360_send_event: touched <6>[ 9143.693450] [2: kworker/u16:6:28199] fps_et7xx_work_func_debug: ldo: 0, sleep: 0, tz: 1, spi_value: 0x0, type: et7xx <6>[ 9144.773860] [1: iod: 658] !@ 8,0 r 546768 13050248 w 189919 3890200 d 161964 91158332 f 0 0 iot 417308 0 th 0 0 0 pt 0 inp 0 0 9144.859 <6>[ 9144.972767] [3: kworker/3:2:19092] tsens[0:231][1:227][2:231][3:227][4:227][5:227][6:231][7:227][8:220][9:231][10:227][11:227][12:224][13:231][14:227][15:228][16:224][17:224][18:224][19:221][20:228][21:224][22:224][23:221][24:221][25:221][26:228] <6>[ 9146.763187] [5: kworker/5:2:12772] thermal_sys: thermal: cdev[panel0-backlight:486] <6>[ 9146.779113] [3: iod: 658] !@ 8,0 r 546768 13050248 w 189921 3890244 d 161964 91158332 f 0 0 iot 417316 0 th 0 0 0 pt 0 inp 0 0 9146.865 <4>[ 9146.826061] [6: Binder:661_1: 667] audit: audit_lost=76610 audit_rate_limit=5 audit_backlog_limit=64 <3>[ 9146.826066] [6: Binder:661_1: 667] audit: rate limit exceeded <6>[ 9148.785769] [3: iod: 658] !@ 8,0 r 546782 13050320 w 189921 3890244 d 161964 91158332 f 0 0 iot 417324 0 th 0 0 0 pt 0 inp 0 0 9148.871 <6>[ 9149.328287] [3: kworker/3:2:19092] [kworke][0x5ac03eeef9][16:49:06.845229] wlan: [19092:I:PMO] pmo_core_psoc_send_host_wakeup_ind_to_fw: Host wakeup indication sent to fw <6>[ 9149.611945] [1: SDHMS:z0.d: 5623] ssrm_camera_info : <6>[ 9149.971456] [3: kworker/3:2:19092] [kworke][0x5ac0fb5a1f][16:49:07.488364] wlan: [19092:I:PMO] pmo_core_is_wow_applicable: lpass enabled, enabling wow <6>[ 9149.971605] [3: kworker/3:2:19092] [kworke][0x5ac0fb68b7][16:49:07.488559] wlan: [19092:I:PMO] pmo_core_enable_wow_in_fw: non-drv wow is enabled <6>[ 9149.971628] [3: kworker/3:2:19092] [kworke][0x5ac0fb6a70][16:49:07.488582] wlan: [19092:I:PMO] pmo_core_enable_wow_in_fw: RTPM wow <6>[ 9149.971651] [3: kworker/3:2:19092] [kworke][0x5ac0fb6c30][16:49:07.488605] wlan: [19092:I:PMO] pmo_core_enable_wow_in_fw: mod DTIM enabled <6>[ 9149.971674] [3: kworker/3:2:19092] [kworke][0x5ac0fb6de8][16:49:07.488628] wlan: [19092:I:PMO] pmo_core_enable_wow_in_fw: forced DTIM enabled <6>[ 9149.971733] [3: kworker/3:2:19092] [kworke][0x5ac0fb7254][16:49:07.488687] wlan: [19092:I:WMI] send_wow_enable_cmd_tlv: suspend type: WOW_IFACE_PAUSE_ENABLED flag is 0xc0 <6>[ 9150.090826] [3: kworker/3:2:19092] tsens[0:231][1:227][2:231][3:224][4:224][5:227][6:227][7:224][8:220][9:235][10:224][11:227][12:224][13:227][14:227][15:224][16:224][17:224][18:221][19:221][20:224][21:224][22:228][23:221][24:221][25:221][26:221] <6>[ 9150.795166] [3: iod: 658] !@ 8,0 r 546787 13050364 w 189921 3890244 d 161964 91158332 f 0 0 iot 417332 0 th 0 0 0 pt 0 inp 0 0 9150.880 <6>[ 9150.814279] [0: SDHMS:E0.h: 5679] sm5714_fg_get_property: psp = 0x12 <6>[ 9151.450239] [0: kworker/0:1:18405] [GRIP] sx9360_process_interrupt: status 4 <6>[ 9151.451598] [0: kworker/0:1:18405] [GRIP] sx9360_touch_process: 0x0 <6>[ 9151.454959] [0: kworker/0:1:18405] [GRIP] sx9360_get_data: retry : 1, CONVSTAT : 0 <6>[ 9151.463118] [0: kworker/0:1:18405] [GRIP] sx9360_get_data: capMain: 1132684, useful: -3288, avg: -3716, diff: 428, Offset: 4716 <6>[ 9151.463129] [0: kworker/0:1:18405] [GRIP] sx9360_send_event: released <6>[ 9151.883274] [5: kworker/5:2:12772] thermal_sys: thermal: cdev[panel0-backlight:486] <6>[ 9152.237438] [0: irq/332-stm_ts: 566] stm_ts 25-0049: [sec_input] [P] tID:0.2756 z:1 major:7 minor:4 loc:C.C tc:1 type:0 noise:(0,00), nlvl:1, maxS:53, hid:0 <6>[ 9152.289132] [0: irq/332-stm_ts: 566] stm_ts 25-0049: [sec_input] [R] tID:0 loc:C.C dd:-16,-24 mc:6 tc:0 p:0 noise:(0,00) nlvl:2, maxS:59, hid:0 <6>[ 9152.800578] [3: iod: 658] !@ 8,0 r 547328 13107356 w 189980 3922432 d 161964 91158332 f 0 0 iot 417800 0 th 0 0 0 pt 0 inp 0 5 9152.886 <6>[ 9153.020533] [3: kworker/u16:3:19036] ufs_sec_wb_ctrl: SEC write booster enable, current WB state is 3. <6>[ 9153.183516] [3: argosd: 3203] sec_argos:argos_pm_qos_notify() name:UFS, speed:1607Mbps, prev level:-1, request level:0 <6>[ 9153.183542] [3: argosd: 3203] sec_argos:argos_freq_lock() update cpu freq 902400 <6>[ 9153.183561] [3: argosd: 3203] set_freq_limit: cflm: id(3) freq(902400) <6>[ 9153.183578] [3: argosd: 3203] cflm_freq_decision: input: type(3), min(902400), max(0) <6>[ 9153.183597] [3: argosd: 3203] cflm_freq_decision: new_min=902400, ltl_max=902400, over_limit=0 <6>[ 9153.183737] [0: argosd: 3203] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(691200 ~ 2400000), p(806400 ~ 2400000) <6>[ 9153.524322] [2: HyPerThread: 915] cflm_freq_decision: input: type(0), min(2400000), max(0) <6>[ 9153.524334] [2: HyPerThread: 915] cflm_freq_decision: new_min=2400000, ltl_max=902400, over_limit=0 <6>[ 9153.524411] [2: HyPerThread: 915] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(2400000 ~ 2400000), p(2400000 ~ 2400000) <6>[ 9153.526324] [0: HyPerThread: 915] cflm_freq_decision: input: type(0), min(0), max(2400000) <6>[ 9153.526346] [0: HyPerThread: 915] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(2400000 ~ 2400000), p(2400000 ~ 2400000) <6>[ 9153.548429] [4:id.app.launcher: 2727] !@Boot_DEBUG: Launcher.onResume() <6>[ 9153.548458] [4:id.app.launcher: 2727] !@Boot_EBS_D: Launcher.onResume() <3>[ 9153.808417] [4:MdnieScenarioCo: 2255] [SDE_mdnie] Current APP : Current APP: UI_APP <3>[ 9153.808417] [4:MdnieScenarioCo: 2255] <6>[ 9154.025879] [3:POSIX timer 317:20302] cflm_freq_decision: input: type(0), min(-1), max(0) <6>[ 9154.026006] [3:POSIX timer 317:20302] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(691200 ~ 2400000), p(806400 ~ 2400000) <6>[ 9154.062561] [6:tspStateManager:20306] tsp: [sec_input] sec_cmd_store: push cmd: set_grip_data,1,45,7,24,720 <6>[ 9154.062580] [6:tspStateManager:20306] tsp: [sec_input] sec_cmd_store_function: cmd = set_grip_data param = 1 45 7 24 720 <6>[ 9154.062612] [6:tspStateManager:20306] stm_ts 25-0049: [sec_input] stm_set_grip_data_to_ic: flag: 04 (clr,lan,nor,edg,han) <6>[ 9154.064989] [6:tspStateManager:20306] stm_ts 25-0049: [sec_input] stm_set_grip_data_to_ic: 0x08 07,18,02,D0 <6>[ 9154.699790] [1: kworker/u16:4:19037] fps_et7xx_work_func_debug: ldo: 0, sleep: 0, tz: 1, spi_value: 0x0, type: et7xx <6>[ 9154.807823] [3: iod: 658] !@ 8,0 r 548366 13212248 w 190324 4034720 d 162114 91162368 f 0 0 iot 418528 0 th 0 0 0 pt 0 inp 0 0 9154.893 <6>[ 9155.092476] [0: kworker/0:1:18405] [GRIP] sx9360_process_interrupt: status 8 <6>[ 9155.093843] [0: kworker/0:1:18405] [GRIP] sx9360_touch_process: 0x8 <6>[ 9155.096210] [0: kworker/0:1:18405] [GRIP] sx9360_get_data: retry : 1, CONVSTAT : 0 <6>[ 9155.103025] [0: kworker/0:1:18405] [GRIP] sx9360_get_data: capMain: 1133673, useful: -817, avg: -3659, diff: 2842, Offset: 4716 <6>[ 9155.103035] [0: kworker/0:1:18405] [GRIP] sx9360_send_event: touched <6>[ 9155.189741] [0: argosd: 3203] sec_argos:argos_pm_qos_notify() name:UFS, speed:0Mbps, prev level:0, request level:-1 <6>[ 9155.189761] [0: argosd: 3203] sec_argos:argos_freq_lock() update cpu freq 0 <6>[ 9155.189769] [0: argosd: 3203] set_freq_limit: cflm: id(3) freq(0) <6>[ 9155.189777] [0: argosd: 3203] cflm_freq_decision: input: type(3), min(0), max(0) <6>[ 9155.189793] [0: argosd: 3203] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(691200 ~ 2400000), p(806400 ~ 2400000) <6>[ 9155.210601] [3: kworker/3:2:19092] tsens[0:243][1:247][2:251][3:243][4:243][5:243][6:247][7:243][8:235][9:243][10:243][11:243][12:243][13:243][14:243][15:240][16:232][17:232][18:232][19:232][20:236][21:236][22:236][23:228][24:228][25:232][26:236] <6>[ 9156.724564] [0: irq/332-stm_ts: 566] stm_ts 25-0049: [sec_input] [P] tID:0.2757 z:1 major:6 minor:4 loc:C.N tc:1 type:0 noise:(0,00), nlvl:3, maxS:59, hid:0 <6>[ 9156.784497] [0: irq/332-stm_ts: 566] stm_ts 25-0049: [sec_input] [R] tID:0 loc:C.N dd:0,0 mc:7 tc:0 p:0 noise:(0,00) nlvl:5, maxS:63, hid:0 <6>[ 9156.811002] [0: iod: 658] !@ 8,0 r 548373 13212332 w 190324 4034720 d 162114 91162368 f 0 0 iot 418532 0 th 0 0 0 pt 0 inp 0 0 9156.896 <6>[ 9157.004738] [5: kworker/5:2:12772] thermal_sys: thermal: cdev[panel0-backlight:486] <6>[ 9157.021344] [6: Binder:3320_1: 3351] cfb_target: uid = 10182 <6>[ 9157.024039] [6: Binder:3320_1: 3351] cfb_target: uid = 10199 <6>[ 9157.527103] [2:POSIX timer 317:20303] cflm_freq_decision: input: type(0), min(0), max(-1) <6>[ 9157.527140] [2:POSIX timer 317:20303] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(691200 ~ 2400000), p(806400 ~ 2400000) <6>[ 9158.076413] [0: irq/332-stm_ts: 566] stm_ts 25-0049: [sec_input] [P] tID:0.2758 z:1 major:10 minor:7 loc:C.C tc:1 type:0 noise:(0,00), nlvl:2, maxS:68, hid:0 <6>[ 9158.139063] [0: HyPerThread: 915] cflm_freq_decision: input: type(0), min(1056000), max(0) <6>[ 9158.139076] [0: HyPerThread: 915] cflm_freq_decision: new_min=1056000, ltl_max=902400, over_limit=0 <6>[ 9158.139111] [0: HyPerThread: 915] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(1056000 ~ 2400000), p(1056000 ~ 2400000) <6>[ 9158.186642] [0: irq/332-stm_ts: 566] stm_ts 25-0049: [sec_input] [R] tID:0 loc:C.C dd:1648,-54 mc:13 tc:0 p:0 noise:(0,00) nlvl:4, maxS:68, hid:0 <6>[ 9158.190502] [3: HyPerThread: 915] cflm_freq_decision: input: type(0), min(1324800), max(0) <6>[ 9158.190514] [3: HyPerThread: 915] cflm_freq_decision: new_min=1324800, ltl_max=902400, over_limit=0 <6>[ 9158.190545] [3: HyPerThread: 915] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(1324800 ~ 2400000), p(1324800 ~ 2400000) <6>[ 9158.191668] [2: HyPerThread: 915] cflm_freq_decision: input: type(0), min(1324800), max(0) <6>[ 9158.191676] [2: HyPerThread: 915] cflm_freq_decision: new_min=1324800, ltl_max=902400, over_limit=0 <6>[ 9158.191684] [2: HyPerThread: 915] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(1324800 ~ 2400000), p(1324800 ~ 2400000)

 

[g.]

Der Fehler ist NACHSTELLBAR: meistens (nicht immer) bei schnellen Filetransfers, sehr oft, wenn ich z.B. per Tastenkombi Power+Leiser einen Screenshot aufnehme
Ich kann nochmal bestätigen, dass die Ursache (aus meiner Sicht) weitestgehend geklärt ist und von Samsung behoben werden müsste. Scheinbar sind für UFS = File System bei schnellen Transfers die CPU Werte nicht hinterlegt oder das File System hat ein Problem (eigene SD Karte ist nicht drin !). Ich habe gesehen, dass die Kernel-Source frei heruntergeladen werden kann, als Entwickler habe ich da mal reingeschaut. Im Coding stehen auch noch "ToDos".
Ich hätte gerne das Feedback, ob der Fehler (der ganz offensichtlich nicht von Apps etc. kommt), zeitnah behoben wird. Ansonsten tendiere ich dazu, das Smartphone wg.Mangel wieder bei Media Markt umzutauschen oder wir einigen uns anders.
Infos:
- Die Firmware/Kernel A528BXXS1AUHA auf dem Smartphone hat übrigens eine Kennung von 2019 = "S", auf https://opensource.samsung.com/ steht allerdings eine Firmware A528BXXU1AUH3 von U=2021 !?
- es geht um ARGOS = 3, s/g/p bei den Frequenzen bedeutet silver, gold, prime. Silver = die vier A55 cores.
- silver_max_lock = 1804800 ist (s.u.) definiert. D.h. es wird irgendwann im Verlauf dieses Maximum "gelockt" und nicht wieder richtig freigegeben
- Caller ist UFS = File System, UFS ist sehr selten der Caller, daher tritt der Fehler teilweise erst nach ein paar Minuten oder Stunden auf (bei bestimmten Aktion gehäuft - s.o. Screenshot), dann aber immer dauerhaft.
Entwickler-Infos:
enum {
CFLM_USERSPACE = 0, /* user(/sys/power/cpufreq*limit) */
CFLM_TOUCH = 1, /* touch */
CFLM_FINGER = 2, /* fingerprint */
CFLM_ARGOS = 3, /* argos */
CFLM_MAX_ITEM
};
Line 207571: <6>[ 44.266749] [5: argosd: 3100] cflm_freq_decision: input: type(3), min(902400), max(0)
Line 207649: <6>[ 46.281816] [3: argosd: 3100] cflm_freq_decision: input: type(3), min(-1), max(0)
Line 207936: <6>[ 62.325309] [3: argosd: 3100] cflm_freq_decision: input: type(3), min(0), max(0)
Line 215680: <6>[ 189.988734] [2: argosd: 3100] cflm_freq_decision: input: type(3), min(902400), max(0)
Line 215772: <6>[ 191.996519] [3: argosd: 3100] cflm_freq_decision: input: type(3), min(0), max(0)
UFS ist definiert in \Kernel\arch\arm64\boot\dts\samsung\a52\a52sxq\a52sxq_eur_open_w00_r02.dts
...
argos {
compatible = "samsung,argos";
#address-cells = <0x1>;
boot_device@1 {
net_boost,label = "WIFI TX";
net_boost,node = "wlan0";
net_boost,table_size = <0x1>;
net_boost,table = <0x14 0x0 0x0 0x8ca00 0x0 0x3f9 0x0 0x0 0x0 0x0>;
};
...
boot_device@4 {
net_boost,label = "UFS";
net_boost,node = [00];
net_boost,sysnode = "/sys/class/sec/ufs/transferred_cnt";
net_boost,table_size = <0x1>;
net_boost,table = <0x320 0x0 0x0 0xdc500 0x0 0x0 0x0 0x0 0x0 0x0>;
};
\Kernel\drivers\cpufreq\cpufreq_limit.c
/* TODO: move to dtsi? */
struct cflm_parameter param = {
.freq_count = 0,
.table_initialized = false,
.s_first = 0,
.g_first = 4,
.p_first = 7,
.g_fmin_up = 691200, /* fixed gold clock for performance */
.ltl_min_freq = 0, /* will be auto updated */
.ltl_max_freq = 0, /* will be auto updated */
.big_min_freq = 0, /* will be auto updated */
.big_max_freq = 0, /* will be auto updated */
.silver_min_lock = 1152000, /* real silver clock */
.silver_max_lock = 1804800,
.silver_divider = 2,
.min_limit_val = -1,
.max_limit_val = -1,
.sched_boost_type = CONSERVATIVE_BOOST,
.sched_boost_cond = false,
.sched_boost_enabled = false,
.over_limit = 0,
.vol_based_clk = false,
};

 

[g.]

Perfetto trace screenshot

 

[g.]

Info: einzelne User auf Reddit und xda berichten von identischen Problemen

 

[g.]

Über Samsung Members nochmal die Antwort erhalten, dass ich Safe Mode, Komplett Werksreset oder Reparatur gegen Preis des "Repair packages" erhalten kann. Die ersten beiden Optionen sind schon erledigt, auch dort ist der Fehler nachstellbar, Log liegt vor.
<6>[ 907.570759] [2: argosd: 3247] sec_argos:argos_pm_qos_notify() name:UFS, speed:6Mbps, prev level:0, request level:-1
<6>[ 907.570771] [2: argosd: 3247] sec_argos:argos_freq_lock() update cpu freq 0
<6>[ 907.570776] [2: argosd: 3247] set_freq_limit: cflm: id(3) freq(0)
<6>[ 907.570781] [2: argosd: 3247] cflm_freq_decision: input: type(3), min(0), max(0)
<6>[ 907.570791] [2: argosd: 3247] cflm_update_current_freq: current freq: s(1804800 ~ 1804800), g(691200 ~ 2400000), p(806400 ~ 2400000)
Reparatur kommt nicht in Frage, wenn es ein Softwarebug ist, kostenpflichtig ohnehin nicht. Also erhoffe ich mir hier noch eine Antwort bezüglich Firmware Patch, ansonsten Umtausch. Ist einfach sehr wahrscheinlich, dass ich das Gerät gegen Geld identisch von der Reparatur wieder zurück bekommen. Das gleiche Modell mit gleicher Software wird auch den gleichen Fehler haben (wie ja nun auch andere User bei xda und Reddit berichten).

 

[g.]

Mal ein "Push", da Samsung mich per Mail fragt, ob das Problem mit den Antworten hier(?) behoben ist. Nein, ist es nicht. Gibt es eine Zwischenmeldung? Danke.

 

[N.]

Hallo L: @gvamp,
entschuldige bitte die späte Rückmeldung! Meine Kollegen haben sich zurückgemeldet und bräuchten noch einmal die kompletten dumpster Log Files, um das Phänomen genauer zu untersuchen. Du hast gesagt, du hättest den Fehler bereits in der Samsung Members App gemeldet, korrekt? Dann bräuchten wir einmal das Datum, wann du die Logs verschickt hast. Ansonsten würde ich dich bitten, das noch einmal bei Samsung Members zu melden und hier Bescheid zu geben. Herzlichen Dank!
Liebe Grüße

 

[g.]

Hallo NathanB, kein Problem:
- der erste Thread wurde am 06.10.21 über Samsung Members eingestellt, alle dortigen Vorschläge wurden ausprobiert. Ich habe den Thread nicht geschlossen, er wurde vermutlich seitens Samsung auf "Beantwortet" gesetzt.
- den Fehlerbericht inkl. des Weiteren Logs habe ich am 19.10.21 auf Wunsch von Samsung über Samsung Members geschickt.
Beide mit meiner gleichen Anmeldung wie hier. Im Übrigen ist es kein Problem nur meines Handys sondern sicherlich auf eurer Seite selbst nachstellbar. Mittlerweile haben sich ja z.B. auch bei android-hilfe einige gefunden, bei denen es sich gleich verhält:https://www.android-hilfe.de/forum/samsung-galaxy-a52s-5g.3991/cpus-0-3-des-galaxy-a52-5g-immer-auf-...
Danke und Gruß,
gvamp